About this Rigging Intermediate Course

Ready to take your rigging skills to the next level? You’re in the right place.

This course provides the practical skills and theoretical knowledge required to safely perform intermediate-level rigging work on construction and industrial sites.

You’ll build on your basic rigging experience and learn to rig more complex structures and equipment such as:

  • Precast concrete and tilt panels

  • Structural steel and conveyors

  • Dual crane lifts and mast climbing hoists

  • Safety nets, static lines, and perimeter screens

This course is designed to prepare you for your High Risk Work Licence (Class RI).

Course Outline

The CPCCLRG3002 course runs over 5 days and includes theory, hands-on practice, and formal assessment.

  • Day 1: WHS regulations and site safety fundamentals

  • Days 2–3: Intermediate rigging operations and skills development

  • Days 4–5: Assessment for High Risk Work Licence (RI)

Training is tailored for work in high-risk environments like construction, mining, and heavy industries.

All course participants must be:

  • 18 years or older
  • Able to read, understand, and write English
  • Able to produce and meet the evidence of identity criteria as per SafeWork / Worksafe identification requirements

Protective Personal Equipment – safety boots, high-visibility vests, and hard hats– is mandatory.

Prerequisite

To enrol, you must already hold:

  • A High Risk Work Licence – Basic Rigging (RB Licence)

If a participant requires a reassessment for a High-Risk Work Licence an additional $250.00 + GST reassessment fee will apply.

Private training can be organised and conducted onsite if the following training and assessment requirements are met:

  • A room with access to power, a blank wall for presentation, a projector screen or a large TV, table/s and chairs.
  • Slewing Mobile Crane, with a telescopic boom and a winch with a minimum lifting capacity of 2t or more (with current service history, free from faults and operator manual present)
  • Licenced crane operator (must hold HRW C2 licence or higher)
  • Lifting equipment: Slings, tagline rope, fibre rope (minimum 10mm)

Required loads:

  1. Loose pipes in stillage (Minimum 2000kg)
  2. Steel plate (approx. 25mm, 1.5 x 0m)
  3. Square Load with defined lifting points such as a bin (minimum 2 tonne)
  4. Round load, such as a telegraph pole/log (minimum of 5m long)
  5. Uneven weighted load such as bin with material inside (minimum 2 tonne)

Learning Outcome
By the end of this course, participants will be able to:

  • Plan and manage rigging operations, including hazard identification

  • Select, inspect and prepare appropriate rigging gear

  • Safely install and dismantle rigging systems for steel, hoists, and precast elements

  • Perform intermediate rigging tasks such as dual crane lifts and suspended loads

  • Conclude operations safely, following shutdown and pack-up procedures

Licence Outcome
On successful completion, you’ll receive:

  • A nationally recognised Statement of Attainment in CPCCLRG3002

  • A High-Risk Work Licence (Class RI) issued by your local WHS authority (e.g. SafeWork NSW or WorkSafe QLD)

Location:

Public course is available at Sydney, NSW & Brisbane, QLD

Course Cost:

NSW $1,686 | QLD $1,996

Course Availability & Pricing

Please see our public course dates below. If there are no dates available or you would like to arrange a private course at your site or ours, then please select the ‘Private courses’ button.

Further Information

Why Get Your Intermediate Rigging Licence?

An intermediate rigging licence is compulsory for carrying out more complex rigging activities on Australian work sites. It will also open doors to career advancement and better-paid jobs in a range of industries where there is a requirement for specialised rigging skills. 

Why Choose Kallibr Training in QLD & NSW

As an industry leader in rigging training, Kallibr Training ensure students have the right skills and knowledge to safely plan, execute, and complete intermediate level rigging activities. Thanks to our unique training methods, these skills are directly transferable across multiple industries.

Unique Rigging Training Methods

We train students in real-world conditions with purpose-built training yards in Sydney and Brisbane. The yards are equipped with specially designed height structures and modern industry standard equipment – cranes, forklifts, boom lifts, and other industrial equipment. 

Our set up provides students with hands on training that mimics real-life rigging situations across a wide range of scenarios, albeit in a safe, controlled space. This allows for a seamless transition to any working environment. 

They also have access to additional practice time should it be required.

Experienced Course Instructors

Kallibr Training’s accredited instructors are highly skilled professionals from diverse backgrounds with years of rigging industry experience – army, fire and rescue, mining, civil and major construction, crane yards etc. They bring a wealth of practical knowledge and insights with them, and can draw on personal experiences to provide real examples and case studies.

Advanced Modern Rigging Equipment and Facilities

All training is done using, well-maintained equipment in purpose-built training facilities in Sydney and Brisbane. We have a wide range of full-sized structures and rigging equipment, including Telex, Tadano, dual hoist cranes, winches, Preston counter-levered crane-loading platforms, and lifting gear. 

This extensive exposure to industry standard equipment during training ensures students easily transition to workplace environments.

Real-World Intermediate Applications

Our  training is specifically designed to be directly applicable across multiple industries. Our students therefore graduate with transferable skills and knowledge, allowing them to work on construction sites, in warehouses, on large-scale industrial projects, mine sites, and even in specialised areas like wind farms.

Certification and Ongoing Support

Upon successful completion of the Intermediate Rigging Licence (CPCCLRG3002 ) course, students receive a nationally recognised Statement of Attainment and can apply for their HRWL - Class RI . 

High Risk Work Licences must be renewed every 5 years in Australia. However, industry bodies recommend undertaking refresher courses every 2 years to stay up to date with current safety and workplace legislation and practices. Many companies in fact insist on this as a condition of employment.

Our refresher courses specifically cater for this, and reinforce safe operating techniques.

Flexible Training Options

Sometimes our public courses or availability don’t suit. To accommodate this, we offer a range of private options. Talk to us about your specific training requirements, and we’ll do our best to accommodate them.

Book your CPCCLRG3002 - Licence to Perform Rigging Intermediate Level Course

Contact us to discuss your rigging training requirements or to book your intermediate rigging training course with us today.

Important Information

If a participant withdraws from a qualification/unit, with less than seven (7) business days notice prior to commencement, Kallibr Training reserves the right to retain the 30% administration booking fee.

No refund will be provided within two (2) business days prior to commencement. No refund will be permitted after course commencement or if a participant fails to attend on the scheduled commencement date.

What to Expect

A Kallibr employee talking to a man

Enquiry Form

Fast track your career – book a training course with Kallibr Training